For those of you who still not used to or not skilled in installing a ceiling or wall made from gypsum, a few tips below can help you make it easier to install screw gypsum at home read more. On the other hand, we also recommend you to call the best ball screw repair service if your ball screws are damaged but they can still be saved by the professionals.
Here are the tips:
Use the Right Equipment
Gypsum material is known to be quite fragile. Therefore, you need the right equipment to ensure the security and accuracy of the installation.
Note the position of the screw head
One of the common mistakes when installing gypsum screws is the position of the screw that goes too deep so that it rips the gypsum sheet or causes a small crack that can eventually spread. This error usually occurs in those of you who are not skilled at using a drilling machine.
To avoid this error, pay careful attention to the position of the screw head when it is about to be installed. There is no need to immerse the screw too deeply because later the screw will be covered with compound and gypsum tape.
Perform Check in the Installation Area
Although it sounds trivial, in fact, this often causes problems in the installation of gypsum boards at home, especially on the ceiling. The condition of the frame of a house that is already bad due to weather or house pests such as rats can affect the installation of gypsum.
Before starting the installation process, check the installation area thoroughly. Make sure each frame angle is still strong and usable. Do not force yourself to drill screws in a frame that is already fragile or cracked because this will only endanger you and your family.
Also, remove annoying objects such as nails or screws that have not been used,